3 Reasons You're Not Getting Ghost Ii Immobiliser Isn't Performing (And The Best Ways To Fix It)

Ghost II Immobiliser

Guard your vehicle against key-cloning, hacking, and car theft. It operates silently and is unnoticeable to thieves because it doesn't utilize LED indicators or key fob tags to let them know it's there.

It is also possible to temporarily disabled by using Transport Mode for situations such as transporting vehicles or when your vehicle is being serviced.

Simple PIN code change process

Ghost is the next generation of security devices. It can secure your car without cutting wires or installing an aftermarket immobiliser or alarm key fobs. It connects directly with the vehicle's CAN Data Network. A personalised PIN code can be programmed by using the factory buttons on the dashboard and steering wheel. This code blocks the engine from starting and is untraceable to any scan or code grabbing techniques employed by modern thieves.

The system also comes with an emergency Pin Code override in case the user forgets their pin code, or a programming button becomes inoperative. The system also comes with the Service/Valet Mode, which allows the vehicle to be started temporarily and driven without requiring the use of a valid code. This makes it ideal for transportation or maintenance.

While the UK automotive aftermarket is thriving but it's not completely safe from theft. The OBD port in your vehicle could be hacked by thieves to bypass most traditional deterrents like locking your steering wheel and wheels. This can be accomplished with a laptop, a USB cable, and an inexpensive OBD scanner which can be bought online for under PS50.

It is essential to secure your vehicle with a Ghost ii immobiliser to stop theft. It's a discrete device that will help protect your vehicle from theft and is simple to use once you've got your PIN number. The device is housed in a small box that can be attached to the wiring harness of your vehicle. It is also weatherproof and can be placed anywhere in your vehicle, making it impossible for thieves to locate. In addition to this the device is simple to install and comes with a guaranty.

Small device that is weatherproof

The device connects to the CAN data network inside your vehicle without cutting any cables and is quiet. It can be programmed using a the unique PIN code that is entered using the buttons on the steering wheel and dashboard to avoid theft. It also comes with an built-in GPS tracker. It is activated by an app on your smartphone and is recommended by several car insurance companies. It is weatherproof and can be hidden in the car which makes it virtually impossible for thieves to locate.

Ghost ii is silent, unlike traditional systems that are audible to criminals. It requires 4 to 21 press on the vehicle's buttons. The owner of the vehicle is able to set the sequence to their liking and it cannot be cracked. There is a mobile app that can be used to turn off the system. If you're selling your vehicle, there's also an master reset code that can reset the immobiliser CAN bus.

Modern thieves can use diagnostics to detect circuit breakages on modern cars however, the Ghost does not contain any circuit cuts. This makes it a truly secure and foolproof system that can be fitted in vehicles by our experienced team of CANbus-certified immobiliser fitters.

The Ghost is compatible with any vehicle, in contrast to other CANbus immobilisers which may require the use of a key fob. The technology is so advanced that it can protect from various security threats, including signal relay attacks as well as ECU switching. It is also compatible with a variety of smartphones, and it can send owners alerts in the event that the vehicle is driven by an unauthorised driver.

Every vehicle is tested

Ghost is an innovative immobiliser system that shields your vehicle from key cloning, hacking, and even key theft like nothing anywhere else available today. To steal a vehicle that is protected by Ghost the thief must physically remove the device and then take it to an unattended trailer. It also shields against the use of wheel locks as well as jumper cables and universal keys.

This system is incredibly simple to set up and runs without a sound. It connects to the CAN data circuit in your vehicle allowing it to communicate directly with your ECU (Engine Control Unit). It is so small and sealed that it can be placed anywhere inside your vehicle.

Once installed it prevents the vehicle from starting unless the unique sequence to disarm is entered by pressing the buttons on your vehicle's steering wheel doors, door panels or the centre console. It can be up to 20 digits and allows you to choose the level of security you want to be. You can also use it to enable a service/valet mode, which allows you to temporarily start your car and drive it without entering your PIN.

Since it is based on the CAN data circuit there are no radio frequency signals, like the traditional immobiliser relay, this means a thief can't listen to the relay to attempt to determine the PIN code is being entered. It has no circuit breaks and cannot be detected using the diagnostic tools, RF scanning or code-grabbing technologies.

At Boundary Car Care we have been privileged to be approved installers of this amazing product for a while currently and are extremely amazed by how well it performs and the peace of mind it gives our customers. It is a great way to safeguard your confidence and joy in these difficult times.

Emergency Pin Code override

The Ghost immobiliser is a tamper-proof and weatherproof device that stops your vehicle from starting without an entered PIN code. It is hidden within the wiring harness of your vehicle. It uses buttons on the steering wheel or dashboard to generate an unique code sequence. Unlike Thatcham devices, it doesn't use LED indications and is linked to your vehicle through the CAN system, which makes it inaccessible to professional thieves using readily available diagnostic tools that can detect alarm/immobiliser circuits within modern vehicles.

Inputting an emergency override on the app on your smartphone will temporarily disable your Ghost immobiliser. This allows you to loan your vehicle to a valet, or family member without sharing your pin number. It is perfect for situations like maintenance, or when you need to leave your car with valet parking or a garage.

Ghost can also be used with a driver fob, which gives you the flexibility of starting your vehicle with either your key or the app. This is perfect if you want to give your child the keys to the car, or if you're unable to enter the pin number in a hurry.

It's no surprise that the Ghost immobiliser, with its simple PIN-change process, user friendly interface, and numerous safety features, is recommended by many insurers. It is also backed by a security warranty. Its sleek, compact design and seamless integration with your vehicle's existing systems make it an essential addition to any high-performance or classic vehicle.

Service/Valet mode

The Ghost immobiliser can prevent thefts of vehicles by preventing communication between the key and the ECU. This means that the engine cannot be started without a specific PIN. It's also hidden in the wiring and is therefore difficult to detect. It does not have LED indicators that could give away its location. This is great when you're looking to hand over your car to a mechanic, or valet parking. To enable valet mode, simply enter the code that was given to you by your engineer upon completion of the installation - this will allow them to start your car without the need to enter the disarm sequence. To exit valet, simply return your car to normal operation. The code will automatically change to your usual pin.

Ghost is designed to work with the CAN bus system in your car in contrast to other aftermarket security products that depend on key-fobs or buttons.  The Key Lab  gives it unmatched protection against the latest theft methods like key cloning and hacking.

Once installed, your engineer will instruct you on how to arm or disarm your vehicle. All of this can be done using your smartphone app. Your engineer will create a unique pin that's easy to remember, yet mathematically inaccessible to thieves. If you forget your pin you don't have to worry because every installation comes with a Emergency PIN Code Override to restore your vehicle to working order.

Our installers are highly skilled and have been trained to ensure that the Ghost is installed correctly. All of our installations are carried out at the customers premises and we provide a walk through on how to operate the device and mobile application. Once your Ghost has been installed we ensure its functionality for life.